Featured Products
Universal Seaming Adhesive – 1 Gallon Container
Universal Seaming Adhesive (Patent Pending) is formulated to be used as a true adhesive for the seaming of shrink sleeves. USA is designed to be used on PVC and PETG shrinkable substrates.
The adhesive comes in three different sizes and has the option of with or without optical brightener. This option is to purchase one gallon containers. If you have lower or higher quantity needs, use the links below to purchase for those volumes
All orders $3,000.00 or higher have free ground shipping within the United States. To qualify for free shipping outside of the United States, on freight shipments, the customer must use a freight forwarder. If a freight forwarder is not used, customer is responsible for all freight charges. Any additional duties, tariffs, VAT tax is the responsibility of the customer.
SHIPPING: Orders with a quantity of 19 or more will be shipped via freight. Please review the information on freight shipping above.
** PLEASE NOTE: Due to Hazardous material shipping restrictions this product only ships via Ground service in the United Stated and International Priority outside of the US. **
Seam-R Shrink Sleeve Seamer
The Seam-R is a stand-alone seamer with speeds of over 400 mpm. The machine comes with “finger-less” forming to prevent scratching on the inside of the sleeves, cantilever unwind and rewind shafts for fast roll changes and quick-set forming section in order to setup a job in just minutes. The machine offers 5 independent servo motors, and 2 nip stations to ensure strict layflat tolerances that your customers demand. The Seam-R also comes with dual unwind perfs, unwind micro-perf, rewind micro-perf, seam detector, and splice detector included in the price.
An optional web width measuring(WWM) system can be added to the machine.
Click here to see the full description and the product brochure below.
Cut-R Shrink Sleeve Cutter
The Cut-R is a stand-alone shrink sleeve servo driven cutter with speeds of up to 400 cpm. The machine comes standard with unwind edge guide, single lineal perf, horizontal and T-Perf.
The Cut-R can cut to length or by using the registration sensor.
There is an optional rewind unit that can be used to wind rolls onto a core after adding a horizontal or T-Perf to the film.
Click here to see the full description and the product brochure below.
Inspect-R Shrink Sleeve Inspector
The Inspect-R is a stand-alone shrink sleeve inspector with speeds of 300 mpm. The machine operates in forward and reverse, with a manual “inspect” button to stop the web and return the film to the desired position in order to remove defective material.
Click here to see the full description and the product brochure below.